|
ENCODER4 - 4 Channel Video Encoder
|
Description: |
| Convert any analog camera into an IP camera with these little video servers! You can also combine them with other IP cameras on the network to integrate smoothly with our 36 channel IP recording software. |
More Information: |
Download Specification Sheet (ENCODER4.pdf)
|
|
|
| Features: |
|
Uses same software as IP cameras
Converts analog camera into 720x480
MPEG4/MJPEG compression
SD card for backup
RS232 input
RS485 interface for PTZ controls
Bitrate Adjustable: CBR, VBR
|
1 Audio In/Out, 2-Way Audio
Password protection
Pre/Post alarm
4 Video In/Out(BNC)
4 alarm Inputs, 4 relay outputs
Motion Detection (1 zone per channel)
|
| Specifications |
ENCODER4 |
|
| Audio in/out |
1 in / 1 out RCA, 2-way |
|
| Compression Format |
MPEG4 / MJPEG |
|
| Dual Streaming, Snapshot |
Yes |
|
| Ethernet - Wireless |
10/100 Base-T, not wireless |
|
| Firmware Upgrade |
HTTP mode, can be upgraded remotely |
|
| Motion Detection |
4 areas (1 per channel) |
|
| Network Protocol |
HTTP, TCP/IP, SMTP, FTP, PPPoE, DHCP, DDNS, NTP, 3GPP, UPnP |
|
| Pre / Post alarm |
Yes, user configurable |
|
| Recording Trigger |
Motion Detection, IP check |
|
| Security |
Password protection |
|
| Simultaneous Connection |
Up to 5 |
|
| Triggered Action |
Mail, FTP, Save to SD card |
|
| Video Bitrate Adjust |
CBR, VBR |
|
| Video Format |
AVI, JPEG |
|
| Video Input/Output |
1 in / 1 out |
|
| Video Resolution |
NTSC: 720x480, 704x480, 352x240, 176x120 |
|
| Power Consumption |
12V, LAN: 600 mA, WLAN: 700 mA |
|
| Dimensions (WxHxD) |
8 1/2 x 1 3/4 x 8 in. (218x44x202mm) |
|
| Weight |
3 lbs. (1400 grams) |
|
|
|
